JLG 120HX ANSI Parts Manual - Manual (Page 15)

3120687 1-9
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
FIGURE 1-3. STEERING AND AXLES INSTALLATION
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
STEERING AND AXLES INSTALLATIONS Ref.
0252605 Standard Machines Ref. 4
0253603 CSA Machines Ref. 3
1 4130282 Spindle Weldment 2
2 4130283 Spindle Weldment 2
3 0252674 Tie-Rod Assembly 2 A
3841167 Rod, Inner - Tie-Rod (1 Per Assembly) 2
3841166 Tube, Outer - Tie-Rod (1 Per Assembly) 2
3421990 Pin, Extension Lock (1 Per Assembly) 2
3420372 Hairpin (1 Per Assembly) 2
1260017 Chain - #3 (1 Ft./2.5cm Per Assembly) 2 Ft./5cm
4 3323002 Nut, Jam 1 1/4"-12NF (RH Threads) 2
5 1660202 Rod, End (RH Threads) 2
6 3300229 Nut, Jam 1 1/4"-12NF 2
7 1660203 Rod, End (LH Threads) 2
8 3421972 Pin (Tie-Rod) 4
9 0641506 Bolt 5/16"-18NC x 3/4" 12
10 4761500 Lockwasher 5/16" 12
11 3532054 Plate, Retainer 4
12 Not Used Kingpin Options: 4
3421948 Standard
3422168 CSA
13 3324203 Nut, Slotted 2"-9NF 4
14 3451012 Pin, Cotter 5/16" x 3" 4
15 1682605
Steer Cylinder Assembly (See Section 5 for Break-
down)
2
16 3422044 Pin (Steer Cylinder) 2
17 3531946 Plate, Retainer 2
18 4740130 Washer, Thrust 2
19 4740314 Washer, Thrust 4
20 3422023 Pin (Steer Cylinder) (Prior to S/N 33213) 2
3422633 Pin (Steer Cylinder) (S/N 33213 to Present) 2
21 3420592 Hairpin 2
22 4713000 Flatwasher 1 1/4" Narrow 2
23 3760170 Ring 4
24 1260017 Chain - #3 (7.25 in./18.5cm Per Location) 14.5 in/37cm
25 2160001 Fitting, Grease - 90° 2
26 2160003 Fitting, Grease - 45° 1
27 4220174 Weldment, Stop (Prior to S/N 47227) 4
28 3450808 Cotter Pin (S/N 47227 to Present) 4