JLG 340AJ Operator Manual - Manual (Page 81)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121258 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................ 3121259
Illustrated Parts Manual ............................................ 3121260
6.2 OPERATING SPECIFICATIONS AND
PERFORMANCE DATA
Operating Specifications
Table 6-1. Operating Specifications
Capacity: Unrestricted:
ANSI
CE & Australia
500 lbs. (227 kg)
500 lbs. (230 kg)
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3. 45%
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-3. 5°
Drive Speed - Stowed 3.1 mph (5.0 kph)
Elevated Drive Speed 0.6 mph (1.0 kph)
Gross Machine Weight - Approximate
ANSI
CE & Australia
9400 lbs. (4263 kg)
9700 lbs. (4400 kg)