JLG 1850SJ Operator Manual - Manual (Page 133)

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121618 – JLG Lift – 7-1
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121619
Illustrated Parts Manual ................................................................3121620
7.2 OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Operating Specifications
Table 7-1. Operating Specifications
Capacity - ANSI
Unrestricted
Restricted
500 lbs (227 kg)
1000 lbs (454 kg)
Capacity - CE & Australia
Unrestricted
Restricted
500 lbs (230 kg)
1000 lbs (450 kg)
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3. 40%
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-4. 5°
Drive Speed 2.8 mph (4.5 kph)
Drive Speed at Elevation 0.3 mph (0.48 kph)
Gross Machine Weight - Approximate 59,900 lb. (27170 kg.)