JLG 601S Parts Manual - Manual (Page 147)

3120867 601S 3-5
SECTION 3 BOOM
Ref. ROTATOR AND SUPPORT INSTALLATIONS OPTIONS (FRONT
ENTRY PLATFORM):
0259490 Ref. Model 601S - CE Spec 1
0259489 Ref. Model 601S - Australian Spec 1
0259474 Ref. Model 601S With a “Enhanced Hostile Environment Package”
- CE Spec 1
0259437 Ref. Model 601S With a “Enhanced Hostile Environment Package”
- Australian Spec 1
101 1 Weldment, Platform Support Options:
4846068 CE Spec
4845683 Australian Spec
102 1683415 1 Platform Level Cylinder Assembly (See Section 5 for
Breakdown)
103 0060034 1 Rotator Assembly (See Figure 3-3 for Breakdown)
104 3422569 1 Pin (Level Cylinder - Boom End)
105 0741607 2 Screw, Countersunk 3/8”-16NC x 7/8”
106 0100011 A/R Loctite #242
107 0641608 1 Bolt 3/8”-16NC x 1”
108 3422580 1 Pin (Level Cylinder - Rotator End)
109 3422562 1 Pin (Rotator)
110 3841143 1 Keeper, Pin
111 0961951 2 Bushing, Garmax
112 0641810 6 Bolt 1/2”-13NC x 1 1/4”
113 3311605 8 Locknut 3/8”-16NC
114 4711600 16 Flatwasher 3/8” (Narrow)
115 0681610 8 Bolt 3/8”-16NC x 1 1/4” (Grade 8)
116 0641820 2 Bolt 1/2”-13NC x 2 1/2”
117 4751800 4 Flatwasher 1/2”
118 3311805 2 Locknut 1/2”-13NC
119 0641604 2 Bolt 3/8”-16NC x 1/2”
120 3841340 1 Loop, Hose
121 4240033 24 Tie-Strap (Model 601S With a “Enhanced Hostile Environment
Package” Machines Only) (Not Shown)
122 2820104 8ft/2.4m Insulator, Hose & Cable (Model 601S With a “Enhanced Hostile
Environment Package” Machines Only) (Not Shown)
Ref. ROTATOR AND SUPPORT INSTALLATIONS OPTIONS (SIDE
ENTRY PLATFORM):
0272070 Ref. Model 601S/601S With a “Enhanced Hostile Environment
Package” D
See Note Ref. CE Spec (Note: For Replacement Parts, Contact JLG
Customer Service and Request Manual p/n 3124287.
201 4846573 1 Weldment, Platform Support
202 1683415 1 Platform Level Cylinder Assembly (See Section 5 for
Breakdown)
203 0060067 1 Rotator Assembly (See Figure 3-4 for Breakdown)
204 3422569 1 Pin (Level Cylinder - Boom End)
205 0741607 2 Screw, Countersunk 3/8”-16NC x 7/8”
206 0100011 A/R Loctite #242
FIGURE 3-1. BOOM AND CYLINDER INSTALLATIONS (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.