JLG 400CRT ANSI Operator Manual - Manual (Page 18)

SECTION 2 - PREPARATION AND INSPECTION
2-6 – JLG Lift – 3121110
20. Ground Controls - Switches operable, no visible
damage, placards secure and legible.
21. Control Valve - Valves properly secured, no visible
damage, no evidence of leakage. Hoses and fit-
tings properly secured, no visible damage, no evi-
dence of leaks.
22. Battery Installation (Gasoline or Diesel Engine) -
Proper electrolyte level, cables secure, no damage
or corrosion. Holddowns secure.
23. Medium Pressure Filter - No visible damage; prop-
erly secured; no evidence of leakage.
24. Steer Linkage - No loose or missing parts; no visi-
ble damage; No obstructions visible.
25. Steer/Drive Wheel and Tire Assembly, Right Front -
Properly secured, no loose or missing lug nuts, no
visible damage. Refer to inflation psi stenciled on
frame.
26. Drive Motor, Right Front (4 Wheel Drive) - No visible
damage, no evidence of leakage.
27. Steer Cylinder and Tie Rod Ends - No loose or
missing parts, no visible damage. No steer cylinder
leaks or damage.
28. Platform Assembly (Not Shown) - No loose or miss-
ing parts, no visible damage, platform deck exten-
sion operates properly.
Figure 2-3. Walk - Around Inspection Points (Sheet 2 of 2)