Hydraulic oil, Hydraulic oil -5, Mobil dte 11m specs -5 – JLG M400 Operator Manual User Manual
Page 87
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121644
– JLG Lift –
6-5
Hydraulic Oil
NOTE:
Hydraulic oils must have anti-wear qualities at least to API Ser-
vice Classification GL-3, and sufficient chemical stability for
mobile hydraulic system service.
Aside from JLG recommendations, it is not advisable to mix oils
of different brands or types, as they may not contain the same
required additives or be of comparable viscosities. If use of
hydraulic oil other than Mobil DTE 11M is desired, contact JLG
Industries for proper recommendations.
Table 6-6. Hydraulic Oil
Hydraulic System Operating
Temperature Range
S.A.E. Viscosity
Grade
+0
o
to + 180
o
F(-18
o
to +83
o
C
10W
+0
o
to + 210
o
F(-18
o
to +99
o
C
10W-20, 10W30
+50
o
to + 210
o
F(+10
o
to +99
o
C
20W-20
Table 6-7. Mobil DTE 11M Specs
ISO Viscosity Grade
#15
Gravity API
31.9
Pour Point, Max
-40°F (-40°C)
Flash Point, Min.
330°F (166°C)
Viscosity
at 40° C
15 cSt
at 100° C
4.1 cSt
at 100° F
80 SUS
at 210° F
43 SUS
cp at -30° F
3.200
Viscosity Index
140