Eppendorf New Brunswick RPC Controller - Manual (Page 9)

9
RPC Controller to External Device — Instructions for use
2 Connect New Brunswick™ RPC controller to external device using internal network
2 New Brunswick™ RPC controller to internal network
Prerequisites
• External device
• Ethernet cable
• TightVNC Client (see Step 4)
• Remote access to internal network (Please inquire with your systems administrator for access
rights)
1. Connect your New Brunswick system to your internal network using the Ethernet port.
2. Navigate to the Hardware screen (Setup Tab) on the New Brunswick System and record the
IP Address (screen shot taken)
Hint!
This will be a wired connection.
1 Ethernet port
1 Record IP address
2
New Brunswick™ RPC contro
ller to in
ternal network