Eppendorf New Brunswick RPC Controller - Manual (Page 11)

11
RPC Controller to External Device — Instructions for use
5. Once installed, run TightVNC Viewer. In the Remote Host field enter IP address of the unit
that you just recorded and select Connect.
You will be promted to enter Password.
6. Enter password and hit OK.
7. Your device should now be connected to the New Brunswick system with full control to
monitor or change any settings.
To disconnect
8. Tap the second button from left at the bottom of the screen > Tap Disconnect.
Hint!
Internal network password 08818.
It may take several minutes to establish connection.
2
New Brunswick™ RPC contro
ller to in
ternal network