BT FREESTYLE 7150 - Manual (Page 54)

Handset settings
Day, date and time
If you subscribe to your network’s Caller Display service,
the date and time are set automatically on all handsets
when your BT Freestyle 7150 receives its first call. If new
handsets are then registered to the base, they will also
receive the current date and time. However, to enable the
answer machine to ‘date stamp’ your messages, you also
have to set the day. The day has to be set manually using
a handset. The date and time can also be set manually
using a handset. If the mains power to the base is cut,
the day, date and time are lost and will need to be reset.
Setting day, date and time using a handset
1. Press MENU . Scroll to TIME AND DATE SETTINGS and
press OK . Display shows SET DATE & TIME . Press OK .
2. Use the keypad to enter the date, e.g.
for 3rd June. Press SAVE .
3. Enter the time (in 24-hour format), e.g.
for 3.30pm. Press SAVE .
4. Press , display shows Set Day . Press OK .
5. Scroll or until the current day is highlighted, then
press SAVE . The new time will not appear on the other
handsets until they go on line or a call is received.
54
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
Time and date do not show on
the display when there are missed
calls/messages.