Eppendorf epT.I.P.S.Version B - Manual (Page 6)

Autoclave pipet tips
epT.I.P.S.
®
English (EN)
6
Please note:
The small amounts of residual moisture that may occur with epT.I.P.S. LoRetention pipette
tips can appear to be higher than with standard epT.I.P.S. pipette tips as the residual
moisture does not remain in the tip as a film, but collects as droplets due to the physical
properties.
Due to the physical properties of the surface of ep T.I.P.S. LoRetention pipette tips 0.1 –
10 μL S and 0.5 – 20 μL L the dispensing volume is slightly lower than the nominal
volume when dispensing purely aqueous solutions. Reproducibility still has the same high
performance as standard epT.I.P.S. pipette tips
8 Autoclave pipet tips
1. Remove the packaging foil.
2. Autoclave the pipet tips.
9 Technical data
9.1 Ambient conditions
Do not use any additional desinfectants during autoclaving for box and rack.
Product Temperature Pressure Time Number of
possible
cycles
ep T.I.P.S. and ep T.I.P.S.
LoRetention 121 °C 1 bar 20 min 5 times
ep T.I.P.S. Rack 121 °C 1 bar 20 min 10 times
ep T.I.P.S. Box 121 °C 1 bar 20 min 100 times
ep Dualfilter T.I.P.S.
ep Dualfilter T.I.P.S.
SealMax
ep Dualfilter T.I.P.S.
LoRetention Can not be autoclaved.
Ambience Only for use indoors.
Ambient temperature 5 °C – 40 °C
Relative humidity 10 % – 95 %, non-condensing.
Atmospheric pressure 79.5 kPa – 106 kPa