beautypg.com

3 dispensing liquid, Eppendorf easypet® — operating manual – Eppendorf Easypet User Manual

Page 13

background image

Eppendorf Easypet® — Operating manual

14

5.3 Dispensing liquid

Flow-out
During flow-out, a valve is opened. In this mode,

liquid dispensing takes place without activating

the pump, only using atmospheric pressure.

1. Place the pipette against the wall of the

vessel.

2. Press the dispensing button down to 5 mm.
Vary the pressure in order to change the

dispensing speed.

Abb. 5:Dispense liquid

Fig. 5: Dispense liquid

Blow-out
During blow-out, liquid is dispensed with the aid

of the pump.

1. In this mode, the dispensing speed can be

continuously adjusted using the adjustment

dial.

2. Place the pipette against the wall of the

vessel.

3. Press in the dispensing button completely.

Easypet