Eppendorf Easypet - Manual (Page 10)

Eppendorf Easypet® — Operating manual
11
To charge the rechargeable batteries, proceed as follows:
1. Insert the power supply into the socket.
2. Insert the charging plug of the power supply into the connector socket on the grip (see Fig. 1
on p. 6).
The red charge control lamp on the grip goes out. The charging time depends on the
charging state of the rechargeable batteries. Fully discharged rechargeable batteries require
a charging time of about 12 hours.
4.3 Storage
Hint!
You can also use the Easypet during the charging process.
The Easypet can be stored in a wall holder.
Fastening the wall holder
1. Clean the fastening point on the wall.
2. Remove the protective foil.
3. Press the wall holder firmly against the wall.
Removing the wall holder
1. Pull the wall holder to one side to remove it
from the wall.
2. Remove the fastening strip with the aid of
commonly-used solvents.
Abb. 2:Easypet with wall holder
Fig. 2: Easypet with wall holder
Easypet