Eppendorf PCR-Cooler - Manual (Page 3)

PCR-Cooler — Instructions for use
3
1 Product description
1 Product description
2 Intended use
2 Intended use
The PCR Cooler is intended exclusively for indoor use and to cool samples during PCR
preparation. Use only Eppendorf accessories or accessories recommended by
Eppendorf.
The PCR Cooler must only be operated by appropriately qualified and trained specialist
personnel. Carefully read the operating manual before working with the PCR cooler and
familiarize yourself with its use.
3 Operation
3 Operation
1. Before use, place the PCR-Cooler in a freezer at –20°C for at least 2 hours.
Position the PCR-Cooler so that its bottom side is facing upwards.
2. Allow the PCR-Cooler to stand on the lab bench for approx. 10 minutes.
1 PCR-Cooler
2 Holder
The PCR-Cooler is a cool pack which is used for
efficient cooling of all standard PCR tubes and
plates.
The PCR-Cooler can be used with:
•
single 0.2 ml and 0.5 ml tubes
•
0.2 ml strips
•
96-well PCR plates.
1
2
NOTICE!
NOTICE! Damage to the PCR-Cooler caused by centrifugation.
The PCR-Cooler is only designed to cool samples during PCR preparation.
Centrifugation forces may result in damage to the PCR-Cooler.
Do not centrifuge the PCR-Cooler. Use a refrigerated centrifuge to
centrifuge samples.
NOTICE!
NOTICE! Damage of the PCR-Cooler from sharp edges.
Sharp edged components can damage the film on the underside of the
PCR-Cooler.
Do not use sharp edged components on the PCR-Cooler.