IKA KS 260 control - Manual (Page 22)

22
HS/KS260 0305
Description of the LED-Display - HS/KS 260 basic
The basic model of the device can be used in continuous or
timed mode depending on the option you select. The ride turn
button is used to make the setting..
Continuous operation:
The device does not interrupt the agitation
sequence (On-LED is lit).
Time operation:
The device interrupts the agitation process
after a set amount of time (max. 50 minutes).
The speed required for the agitation process can be adjusted
before ore after the operating mode is selected.
The HS/KS 260 basic is adjusted so that after you press the
power switch, the agitation process (speed) and time mode is
turned off (Off-LED lights up).
Description of the LCD-Display - HS/KS 260 control
Settingthe operation mode (control model only)
The Control device model can be operated in the modes descri-
bed below:
Operation mode A:
The HS/KS 260 control is switched into operating mode A when
it leaves the factory. After the device is turned on with the power
switch (flip switch), the agitation and time expiration functions
are turned off. The set target values are stored and are display-
ed digitally. They are adopted when the corresponding functions
are turned on. the set target values can be varied. After the
Display
50 100 150 200 250 Mot 1/min
Time min
300 350 400 450 500
On Off 40 45 50 35 30 20 1015 525
Display element for the setting speed
Display element for
the setting agitation time Continuous
operation Standstill
Real value Rated value
e.g. phys. unit,
mode of operati-
on, error code Mode of operation A: Star out
Mode of operation B: Star on
Mode of operation C: Star flash
S SV V = S S et V V alue
(Rated value)
P PV V = P P rocesst V V alue
(Real value)
Operating modes
= = = Locking