Correct use unpacking commissioning switching on – IKA KS 4000 ic control User Manual
Page 19

19
8888 888 888
Make sure before start-up of the equipment that the drain hose
leads into a drain!
Check whether the voltage specified on the type plate matches
the mains voltage available. The power socket used must be ear-
thed (protective earth conductor contact). If these conditions are
met, the device is ready to operate after plugging in the mains
plug. If these procedures are not followed, safe operation cannot
be guaranteed and/or the equipment may be damaged.
Observe the ambient conditions (temperature, humidity, etc.)
listed under Technical Data.
The appliance is switched on using
the switch on the side of the applian-
ce. Once it has been switched on, all
of the LEDs light up briefly during the
self test.
• Use
- For mixing and/or heating liquids
• Range of use
- Laboratories
- Schools
- Pharmacies
This device is suitable for use in all areas except:
- Residential areas
- Areas that are connected directly to a low-voltage supply net-
work that also supplies residential areas.
The safety of the user cannot be guaranteed if the appliance is
operated with accessories that are not supplied or recommen-
ded by the manufacturer or if the appliance is operated impro-
perly contrary to the manufacturer’s specifications or if the appli-
ance or the printed circuit board are modified by third parties.
• Unpacking
- Please unpack the device carefully
- In the case of any damage a detailed report must be set imme-
diately (post, rail or forwarder)
• Contents of package
KS 4000 i control
KS 4000 ic control
- Shaking device
- Shaking device (temperierbar)
- Mains cable
- Mains cable
- Operating instructions
- Operating instructions
- 4 clamping screws short
- 4 clamping screws short
- 2 clamping screws long
- 2 clamping screws long
- Temperature sensor PT 1000.60
- Temperature sensor PT 1000.60
- 2 hose connecting pieces
- unlocking handle
KS 4000 i 1208
Correct use
Unpacking
Commissioning
Switching on
Main switch I / 0
1
2
Display fields
A
01
Software
version
Operating mode
SAFE 275 55.5
3
Safety
max. ad- max. ad-
limit
adjustable ajustable
values
speed temperature
Note the load guideline values for the attachments prior to
switching appliance on (see "Attachments").