IKA T 10 standard ULTRA-TURRAX - Manual (Page 12)

12
T 10 standard_092012
Contents
EN
Page
EC-declaration of conformity 12
Explanation of symbols 12
Safety instructions 13
Correct use 14
Unpacking 14
Useful information
15
Drive unit 15
Assembly of clamp and stand 15
Working with the unit 16
Error correction 16
Maintenance and cleaning 16
Note to the flat key and shaft key 17
Accessories 17
Permitted dispersing tools
17
Speed table 18
Technical data 18
Warranty 19
EC-Declaration of conformity
We declare under our sole responsibility that this product
corrosponds to the regulations 89/336EC, 98/37EC and 2006/95EC
and conforms with the standards or standardized documents DIN
EN IEC 61010-1, DIN EN IEC 61326-1, DIN EN ISO 12100-1, -2 and
EN 60204-1.
Explanation of symbols
General hazard
This symbol identifies information that is of vital
importance for safeguarding your health
and safety. Disregarding this information can
lead to health impairment and injuries.
This symbol identifies information that is of
importance for the technically correct
functioning of the system. Disregarding this
information can result in damage to the instru-
ment or to system components.
This symbol indicates information which is im-
portant for ensuring that the operations of
the appliance are performed efficiently and
for using the instrument. Failure to observe
this information can result in inaccurate results.
Source language: German
DANGER
WARNING
ATTENTION