Snorkel TB100J Manufactured/EMS Kits 7-05 and after - Manual (Page 22)

Chapter 5 – Gauges and Displays
18 TB100J – 0192517
Fluid Level and Temperature Gauge
A gauge on the left end of the reservoir displays the
level and temperature of the hydraulic fluid (refer to
Figure 5.6).
Figure 5.6 – Hydraulic Fluid Gauge
If the temperature rises above 200°F (93°C) stop ma-
chine operation and let the fluid cool before resuming
operation.
Figure 5.4 – LPG Fuel Tank
The LPG tank is mounted horizontally behind the rear
cowling door on the right side of the machine. Read the
horizontal scale to determine the fuel level.
Engine Oil
The engine oil level is measured with a dipstick. The
dipstick is the only way to accurately determine the
engine oil level. The engine oil level should always be
between the add and full marks on the dipstick.
Hydraulic Fluid Filter Gauge
The fluid filter gauge (refer to Figure 5.5) is located on
the return line filter on top the reservoir. The reservoir is
behind the door on the right side of the turntable. Dur-
ing high pump flow situations, the gauge indicates the
condition of the filter. When the needle on the gauge is
in the red zone, its time to change the filter.
Figure 5.5 – Hydraulic Fluid Filter Gauge
Filter Gauge
Fluid Level and
Temperature Gauge
Horizontal Scale