Snorkel MHP35 User Manual
Operator’s manual, Engine powered gasoline/diesel battery electric
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Electrical Hazard
- Introduction
- 1. Safety
- Safe Operation 1-1
- Electrocution Hazards 1-1
- Pre-start Inspection 1-1
- Work Place Inspection and Practices 1-1
- Operation 1-2
- Tipover and Falling Hazards 1-3
- General Safety Precautions 1-3
- Hydraulic System Precautions 1-3
- Fire Prevention 1-3
- Engine and Fuel Handling Precautions 1-4
- Batteries 1-4
- Safety Decals and Placards 1-4
- 2. Safety Devices
- 3. Specifications
- 4. Gauges
- 5. Automatic Shut-offs and Circuit Breakers
- 6. Controls
- 7. Daily Inspection and Maintenance
- Daily Inspection and Maintenance Table 7-1
- Engine Fuel Level 7-2
- Fuel Tank Cap 7-2
- Fuel Leaks 7-2
- Engine Oil Level 7-2
- Operator's Manual 7-2
- Wiring Harnesses 7-2
- Battery Terminals 7-3
- Battery Fluid Level 7-3
- Hydraulic Oil Level 7-3
- Hydraulic Oil Leaks 7-3
- Bolts and Fasteners 7-4
- Wheels and Tyres 7-4
- Structural Damage and Welds 7-4
- Lanyard Anchor Points 7-5
- Platform Gravity Gate 7-5
- Platform Guardrails 7-5
- Flashing Light (option) 7-5
- Ground Control Switches 7-6
- Emergency Lower 7-6
- Platform Control Switches 7-6
- AC Outlet RCD/ELCB (option) 7-7
- Placards and Decals 7-7
- 8. Operation
- Operating Procedures 8-1
- Control Stations 8-1
- Emergency StoppingLower Control Box 8-1
- Emergency StoppingUpper Control Box 8-1
- Operation Considerations 8-2
- Starting From Ground Control Box 8-2
- Stabiliser Operation 8-2
- Self Levelling Stabilisers (Option) 8-2
- Starting From Platform Control Box 8-3
- Moving The Platform 8-4
- Securing for Day 8-5
- 9. Emergency Operation
- 10. Stowing and Transporting
- 11. Options
- 12. Fire Fighting and Chemical Containment
- 13. Operator's Troubleshooting
- Index
- A
- B
- C
- Controls
- Control switches
- Boom Speed, 6-2, 6-3
- Choke/Cold Start, 6-2, 6-3, 8-2, 8-4
- Emergency Lower, 6-3
- Emergency Stop, 6-2, 6-3, 8-1
- Emergency Stop switch, 8-2, 8-4, 9-1
- Foot Switch, 6-3
- Jib Boom, 6-2, 6-3
- Lift Enable, 6-2
- Lower Boom, 6-2, 6-3
- Master Key Switch, 6-2, 7-1, 8-2, 8-3, 9-1
- Platform Rotate, 6-3
- Platform/Ground Selector, 6-2, 8-2, 8-3, 9-1
- Slew, 6-2, 6-3
- Stablizer / Boom Secector Switch, 6-2
- Start, 6-3, 8-4, 9-1
- Upper Boom, 6-2, 6-3
- Ground Control Box, 6-2
- Platform Control Box
- Control switches
- Controls and Control Decals Locations, 6-1
- Controls
- D
- E
- F
- G
- H
- I
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- W