Snorkel XRT27 Electric-sn1000+ User Manual

Page 2

Page 2

X27 Electric

This manual covers the X27 Electric Work Platform. This machine operates on a 48 volt battery
powered system. This manual must be stored on the machine at all times.

Reference: • “Specifications” on page 12

• “Battery Maintenance” on page 9
• “Figure 1:Controls” on page 4

NOTE: Carefully read, understand and follow all safety rules, labels, and operating

instructions, then perform the following steps each day before use.

1. Open panels and check hydraulic components and hoses for damage or leaks. Check electri-

cal components and wiring for damage or loose connections.

2. Inspect chassis, axles, hubs, and steering linkage for damage, deformation, buckled paint,

loose or missing hardware, and cracked welds.

3. With platform fully lowered, check the hydraulic oil level sight gauge on the hydraulic tank. Add

ISO #46 hydraulic oil if necessary.

4. Check that fluid level in all batteries is correct.
5. Check that all guardrails are in place. Insure that gate operates freely and latches securely.
6. Check tires for damage.
7. Carefully inspect the entire work platform for damage such as cracked welds or structural

members, loose or missing parts, oil leaks, damaged cables or hoses, and loose connections.

NTRODUCTION

-O

PERATION

AND

AFETY

NSPECTION

W A R N I N G

DO NOT use a machine that is damaged or malfunctioning. Tag and remove
the unit from service until it is repaired.