Snorkel SL26 Plus-sn51000 - Manual (Page 21)

Page 17 Operation Manual
The Complete Inspection consists of periodic visual and operational checks, along with periodic minor
adjustments that assure proper performance. Daily inspection will prevent abnormal wear and prolong the
life of all systems. The inspection and maintenance schedule should be performed at the specified intervals.
Inspection and maintenance shall be performed by personnel who are trained and familiar with mechanical
and electrical procedures.
Before performing preventative maintenance, familiarize yourself with the operation of the machine.
Always block the elevating assembly whenever it is necessary to perform maintenance while the platform
is elevated.
The daily preventative maintenance checklist has been designed for machine service and maintenance.
Please photocopy this page and use the checklist when inspecting the machine.
Inspection and Maintenance Schedule
I
NSPECTION AND
M
AINTENANCE
S
CHEDULE
W A R N I N G
DAILY PREVENTATIVE MAINTENANCE CHECKLIST
MAINTENANCE TABLE KEY PREVENTATIVE MAINTENANCE REPORT
Y = Yes/Acceptable Date:__________________________________
N = No/Not Acceptable Owner: ________________________________
R = Repaired/Acceptable Model No: _____________________________
Serial No: _____________________________
Serviced By: ___________________________
COMPONENT INSPECTION OR SERVICES Y N R
Battery
Check electrolyte level.
Check battery cable condition.
Chassis
Check hoses for pinch or rubbing points.
Check welds for cracks.
Control Cable
Check the exterior of the cable for pinching, binding
or wear.
Controller Check switch operation.
Drive Motors Check for operation and leaks.
Elevating
Assembly
Inspect for structural cracks.
Emergency
Lowering System
Operate the emergency lowering valve and check for
serviceability.
Entire Unit Check for and repair collision damage.
COMPONENT INSPECTION OR SERVICES Y N R
Hydraulic Fluid Check fluid level.
Hydraulic Pump Check for hose fitting leaks.
Hydraulic System Check for leaks.
Labels
Check for peeling, missing, or unreadable labels &
replace.
Platform Deck and
Rails
Check welds for cracks.
Platform Deck and
Rails
Check condition of deck.
Tires and Wheels Check for damage.