BT FREESTYLE 7310 - Manual (Page 66)

4. Display shows ENTER NEW PIN . Enter the new PIN and
press SAVE . Display shows CONFIRM NEW PIN . Enter your
new PIN again.
4. Press SAVE . The display shows SYSTEM PIN CHANGED .
5. Press to return to standby or BACK to go one step
back in the menu.
Repeater mode
You can use a repeater to boost the range and reception
of your base. A repeater must be registered with the base
and the repeater function must be set to ON.
The default setting is off.
1. Press MENU then scroll DOWN to BASE SETTINGS and
press OK . Scroll DOWN to REPEATER MODE .
2. Press OK then LEFT or RIGHT to select ON or OFF .
3. Press SAVE to keep the settings displayed.
4. Press to return to standby or BACK to go one step
back in the menu.
66
BT Freestyle 7310 – Issus 02 – Edition 01 – 24.03.05 – 6763
Base settings