Lukas LKS 31 - Manual (Page 16)

16
9.2 Preventative service
9.2.1 Note concerning care
The exterior of the equipment is to be cleaned from time to time in order to protect it from
external corrosion. Oil is to be applied to the metallic surfaces.
9.2.2 Functional and loading test
If there is any doubt regarding the safety or reliability of the equipment, a function and load
test must also be performed.
LUKAS offers appropriate test equipment to this end.
9.3 Repairs
9.3.1 Replacing the blades, protection hose and handle
1. First of all, carefully clean the rescue equipment.
2. Next, close the blade arms so that the tips are almost touching.
REMARK:
The blade bolts are only accessible when the blade arms are almost
touching.
3. Remove self-locking nut (A) and push the
pivot bolt (B) out.
4. Slide the protection hose slightly to one
side until the locking bolts (C) are easily
accessible.
5. Remove the retaining rings (D) and push out
bolt (C).
6. Now, you can remove blade (E) and sliding
plates (F).
A
B
C D
C D
E
E
F