Lukas SC 250 M - Manual (Page 20)

20
11. Technical data
11.1 Combi tools
Since all values are subject to tolerances, minor differences may occur between the data on
your device and the data in the following schedules!
The values can also differ due to reading inaccuracies and/or the tolerances of the measuring
equipment used.
NOTE:
The following tables contain only the technical data required for standard
acceptance.
Additional data concerning your unit can be obtained from LUKAS on request
Type SC 250 M
Ref. no. 173055000
Dimensions
(l x w x h)
[mm] 850 x 190 x 158
[in.] 33.47 x 7.49 x 6.23
max. cutting opening
[mm] 225
[in.] 8.9
max. cutting force
(rear end of the cutting
surface) [kN] 261
[lbf.] 58,673
max. spreading distance
(on the blade tips)
[mm] 308
[in.] 12.1
max. spreading force
(25mm from the tips)
[kN] 34
[lbf.] 7,643
Mass incl. hydraulic fl uid
[kg] 11,9
[lbs.]
Cutting classifi cation acc.
to NFPA 1936
A6/B6/C6/D7/E7
If the defects cannot be remedied, inform an authorised LUKAS dealer or contact LUKAS
Customer Service directly!
The address of LUKAS Customer Services is:
LUKAS
Hydraulik GmbH
Weinstrasse 39, D-91058 Erlangen
Box No. 2560,
D-91013 Erlangen
Tel: (+49) 09131 / 698 - 348
Fax: (+49) 09131 / 698 - 353