Ruvati RVF1252RB - Manual (Page 5)

Hot & Cold Water Supply Hoses
®
RVF1252RB
www.ruvati.com Printed in USA
1-855-4-RUVATI
Page 4
Installation
®
3. Place the faucet body into the
faucet hole of the deck/sink (Figure
3). A standard 1-3/8” hole is required
for this faucet.
Figure 3
Figure 2
Figure 1
2. Attach the hot and cold water sup-
ply hoses to the faucet by screwing
the male end of each hose into the
base of the faucet body (Figure 2).
1. Remove rubber washer, metal
washer, and locknut from the threaded
shank (Figure 1). If you look closely,
you will find a black rubber O ring
sitting in a groove on the underside of
the base of the faucet, just above the
threaded shank. Do not remove this O
ring (Figure 1).