Safety instructions – ADAM Audio MP1 User Manual
Page 3

3
MP1 Manual
/ English
Protect the cord from being walked on or pinched.
To completely disconnect from AC mains, disconnect the power supply from the
AC receptacle.
Always use fully checked cables. Defective cables can harm your speakers. They
are a common source for any kind of noise, hum, crackling etc.
The monitor should be installed near the socket outlet and disconnection of the
device should be easily accessible.
Assure free airflow behind the speakers to maintain sufficient cooling.
Never use flammable or combustible chemicals for cleaning audio components.
Never expose this product to extremely high or low temperatures. Never
operate this product in an explosive atmosphere.
Avoid touching the speaker membranes and do not block the woofer’s
ventilation ports.
Please note that the drivers build up a magnetic field. Do not ply with magnetic
items at close range to the diaphragms.
High SPLs may damage your hearing! Please do not get close to loudspeakers
when used at high volumes.
Always unplug sensitive electronic equipment during lightning storms.
Always keep electrical equipment out of the reach of children.
Safety Instructions