Lull 944E-42 Operation Manual - Manual (Page 40)

Section 3 - Controls and Indicators
3-2 31200354
3.2 CONTROLS
1. Accelerator Pedal: Pressing down the pedal increases engine and hydraulic
speed.
2. Ignition Switch: Key activated. See page 3-8.
3. Service Brake Pedal: The further the pedal is depressed, the slower the travel
speed.
With service brake pedal depressed and boom angles above 40°, the locked
mode of the Stabil-Trak system is activated. See page 3-19.
4. Transmission Control Lever: See page 3-10.
5. Dash Panel: See page 3-6.
6. Instrument Panel: See page 3-4.
7. Steering Wheel: Turning the steering wheel to the left or right steers the
machine in the corresponding direction. Three steering modes are available.
See “Steer Modes” on page 3-18.
8. Frame Level Indicator: Enables operator to determine the left to right level
condition of the telehandler.
9. Horn: Depress button to sound horn.
10. Accessory Control Lever (if equipped): See page 3-17.
OU1911
14
13
4
5
6
8
9 10
11
12
13
1
2
3
7
SINGLE JOYSTICK
CONFIGURATION