BRK electronic SCO2B - Manual

Description:
SEPARATE SMOKE & CO
Combination alarm detects both
dangers and eliminates the need for
two separate alarms.
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
END OF LIFE SIGNAL
Provides audible notice when alarm
needs to be replaced.
TWO LOCKING
FEATURES
Pins lock battery drawer and/or alarm to
base. Perfect for apartment, dormitory or
hotel applications.
Available in the following versions:
SCO2B Alkaline Battery
SCO2LB Long Life Lithium Battery
CAT.
SCO2B/SCO2LB
9V Battery Powered
The BRK Brands, Inc. model No SCO2 is a battery powered single station
combination smoke and carbon monoxide alarm specifically designed for
residential and institutional applications including sleeping rooms of hospitals,
hotels, motels, dormitories and other multi-family dwellings as defined in
standard NFPA 101 Model SCO2B complies with UL217, UL2034, CSFM, NFPA
72, NFPA 720, HUD, FHA and other agencies that model their codes after the
above agencies. They meet building codes where battery powered smoke and
carbon monoxide alarms are required either separately or in combination.
The BRK SCO2B features a dual ionization smoke sensing chamber and an
electrochemical carbon monoxide sensor, 9V battery powered, an 85dB horn, an
End of Life and a silence feature. The SCO2B features a 9V alkaline battery and
the SCO2LB a 9V long life lithium battery. “Intelligent Sensing Technology” is
designed to reduce nuisance alarms. “Latching Alarm Indicator” remembers
which unit initiated an alarm. The unit that triggered the alarm will store in
memory or “latch” the information and begin to flash the LED indicator 2
seconds on, 2 seconds off. The “Perfect Mount” system features a gasketless
base and a mounting bracket that keeps the alarm secure over a wide rotation
range to allow for true alignment. A single button test/silence button eliminates
confusion. Battery installation and removal can occur while the unit is mounted
to the ceiling or wall via the side load battery compartment. Other Contractor
Preferred features include a dust cover to keep alarm clean during construction.
Two locking features are provided to prevent battery theft and/or theft of the unit.
Designed for wall or ceiling mounting. Includes mounting anchors and screws.
SMOKE & CO
COMBO
A L A R M
7