Removing and replacing the battery – Apple MacBook (13-inch, Aluminum, Late 2008) User Manual
Page 34

34
Chapter 3
Boost Your MacBook
This chapter provides information and instructions for replacing the battery, upgrading
the hard disk drive, and installing additional memory in your MacBook.
Removing and Replacing the Battery
You can replace your battery if you need a new one. You also need to know how to
remove the battery if you want to replace the hard disk drive or install memory.
To remove and replace the battery:
1
Shut down your MacBook. Disconnect the power adapter, Ethernet cable, security lock,
and any other cords connected to the MacBook to prevent damaging the computer.
WARNING:
Apple recommends that you have an Apple-certified technician install
replacement drives and memory. Consult the service and support information that
came with your computer for information about how to contact Apple for service. If
you attempt to install a replacement drive or memory and damage your equipment,
such damage is not covered by the limited warranty on your computer.
WARNING:
The internal components of your MacBook can be warm. If you have been
using your MacBook, wait 10 minutes after shutting down to let the internal
components cool before continuing. Use care when handling the battery. See the
battery safety information on page 70.