Apple AirPort Extreme 802.11n (4th Generation) - Manual (Page 23)

Chapter 3 Setting Up the AirPort Extreme 23
Use the setup assistant in AirPort Utility to enter your ISP settings and configure how
the AirPort Extreme shares the settings with other computers.
1 Choose the wireless network you want to change. On a Macintosh, use the
AirPort status menu in the menu bar. On a computer using Windows XP, hold the
pointer over the wireless connection icon until you see your AirPort network
name (SSID), and choose it from the list if there are multiple networks available.
The default network name for an Apple base station is AirPort Network XXXXXX, where
XXXXXX is replaced with the last six digits of the AirPort ID, also know as the Media
Access Control or MAC address. The AirPort ID is printed on the bottom of an
AirPort Extreme.
2 Open AirPort Utility, located in the Utilities folder in the Applications folder on
a computer using Mac OS X, or in Start > All Programs > AirPort on a computer
using Windows.
3 Select your base station and click Continue.
4 Follow the onscreen instructions to configure and share Internet access on your
AirPort Extreme.
Using AirPort Utility is a quick and easy way to set up your base station and network.
If you want to set additional options for your network, such as restricting access to your
network, or setting advanced DHCP options, you can choose Manual Setup from the
Base Station menu of AirPort Utility.