Bmw 325i – BMW 01 41 0 155 307 User Manual

Page 82

DSC

– BMW 325i

Deactivate DSC and ADB

Hold the DSC switch down for at least
3 seconds. The indicator and the yellow
brake warning lamps will remain on the
entire time.

In this case, no interventions to
increase stability and traction for engine
and brakes are carried out.

To maintain vehicle stability,
always drive with the DSC on

whenever possible.

Reactivate DSC and ADB

Press the button again; the indicator
lamp or the indicator lamps will go out.

The laws of physics cannot be
repealed, even with DSC. It will

always be the driver's responsibility to
drive in a manner that matches road
conditions. We therefore urge you to
avoid using the additional safety margin
of the system as an excuse for taking
risks.
Whenever the ADB is activated, the
DSC is switched off and will not
perform any stabilizing intervention.
Do not make any modifications to the
DSC system. Allow only authorized
technicians to perform service proce-
dures on the DSC.

For additional information concerning
DSC, please refer to the chapter
"Advanced technology" on page

173