Apple Wireless Keyboard and Mouse - Manual (Page 5)

English 5
The first time you start up your computer, the Setup Assistant welcomes you and
guides you through the steps to set up your Apple Wireless Keyboard and Mouse and
pair them with your computer.
1 Turn on the Apple Wireless Mouse by sliding the switch that covers the LED to expose
the LED.
2 Turn on the Apple Wireless Keyboard by moving the switch to the on position (toward
the Power On light, or LED).
3 Turn on your computer.
4 Once your computer starts up, follow the onscreen instructions in the Setup Assistant.
About Your Apple Wireless Keyboard and Mouse
Naming Your Keyboard and Mouse
Your computer automatically gives your wireless keyboard and mouse a unique name
the first time you pair them. You can rename your keyboard or your mouse using
Keyboard & Mouse preferences. Choose Apple (
K ) > System Preferences and click
Keyboard & Mouse. Click Bluetooth and enter a new name in the field.
About Your Batteries
Your Apple Wireless Keyboard comes with four alkaline batteries and your Apple
Wireless Mouse comes with two nonrechargeable lithium batteries. You can use
alkaline, lithium, or rechargeable AA batteries in the keyboard or the mouse.
Slide this switch to
turn the mouse on
and off. When the
switch uncovers the
LED, the mouse is on.
This switch turns the
keyboard on and off.
Slide the switch toward
the front of the keyboard
to turn it on.
Power On light
Warning: When replacing the batteries, replace them all at the same time. Don’t mix
battery types. Don’t open or puncture the batteries, install them backwards, or expose
them to fire, high temperatures, or water. Keep batteries out of the reach of children.
If batteries are swallowed or lodged in the ear or nose, promptly see a doctor.
LL2382.book Page 5 Friday, April 30, 2004 4:25 PM