SCT Livewire TS (Ford 5015,GM 5416) - Manual (Page 8)

SCT PERFORMANCE, LLC.
User’s Manual
• Ambient Light Sensor
• Audio
• Ignition Key Check
• Power Save Mode
2.2 Loading Email Custom Tunes to the Livewire TS
1. Before connecting your LWTS to your PC, go to www.sctflash.com and click on the Tech
Support tab on the top of the page. Select the image of your device, download and
completely install SCT Device Updater.
2. Connect your device with the USB cable provided to the back of your computer. (Allow
about 30 seconds for the drivers to install)
3. Save your custom tunes from your email to your desktop.
4. Open SCT Device Updater software that you just installed, there will be a shortcut icon
on your desktop.
5. Now select “Load Custom Tune File” from the Basic Operations menu followed by
clicking on “Locate Custom Tunes”
6. Select the desired tune and select the slot you would like to load the file to.
7. Press “Program” when ready to transfer the custom tune to the LWTS.
8. Repeat steps 5-7 if you wish to load more than one file.
2.3 Menu Navigation
Program Vehicle
• Return to Stock
• Strategy Tunes
• Custom Tunes
Gauges / Datalog
• Configuration
• Monitor
Diagnostics
• Read DTC
• Clear DTC
Performance Tests
• 0-60 PMH
• ¼ Mile
• Braking
Vehicle Info
• Vin
• Strategy
• Vehicle Weight
Device Info
• Device Name
• Device Part #
• Serial Number
• Firmware Version
• Preloaded Tuning
• Custom Tuning
• Tune Revision
• Market
• Unlocks Left
• Married Status
• Current Flash
• Total Flashes
• Support Info
• Vehicle Batt
• Vehicle Board FW
• License Notice
Device Settings
• LCD Brightness Day Time
• LCD Brightness Night Time
• Theme: Red / Blue / Dark