DTS surround encoder - Manual (Page 4)

1. Installation
1.1 PC Standalone Installation
System requirements
■ PC computer, Pentium 4, 1GHz or higher (recommended)
■ 256 MB RAM
■
1 hard drive, 7200 RPM minimum, 200 MB free disk space
■
Greater than 20 GB disk space for audio files
■
USB port for the license adapter key (dongle)
■ Windows XP Home edition or XP Professional (SP1)
Surround Encoder installation procedure
The installation of the Surround Encoder software onto a PC computer is a
simple process.
Three software components will be installed
■
An update to Java virtual machine (if needed)
■
Runtime for the adapter key dongle (WIBU, a third party)
■ DTS Pro Series Surround Encoder software, which includes the Pro Packer,
Pro Encoder, and Pro Encrypter utility and libraries
Important: Proper privileges are required to install and uninstall Surround
Encoder software, including the WIBU driver for the auto-detected adapter
key (dongle).
Instructions
! Caution: Do not install the adapter key (dongle) before the software has
been installed. Install the adapter key into a USB port on your system
after the software has completed installation.
1. Insert the CD-ROM (DTS #9311E90801) into the CD-ROM drive.
The Installation process should start automatically. If it does not automatically
start, then from the Start menu, select Run and Browse to the proper
setup.exe on the CD-ROM.
2. Proceed through the series of prompts. Accept all default settings.
Restart your computer when prompted to do so.
When installation is complete, a set of three icons will appear on
your PC desktop.
DTS Pro Series Surround Encoder – Installation and User Manual
2