PureFlow AirDog RP-150 Replaces High Pressure Pump - 6.0L Ford 2003-2007 - Manual (Page 3)

3
OVERVIEW
Welcome to the
Raptor™ Fuel Pump
The Raptor™ Fuel Pump is a Premium replacement lift pump for the Ford
PowerStroke 6.0L diesel engine. A complete installation kit is included.
The Raptor™ output pressure for the 6.0L PowerStroke is factory set at 50 PSI and
may need to be re-adjusted at the time of installation.
Pressure and flows are approximate as they will vary with fuel temperature and as
the brushes wear in. Also, pressures will vary with each installation due to the
differences in vehicle voltage/amp output and fuel line installation.
The High Pressure Raptor™ RP-150 is recommended for highly modified 6.0L
PowerStroke.
The Raptor™, a gerotor fuel pump, features an adjustable pressure regulator and
has a protective wire screen insert at the fuel inlet.
PureFlow AirDog Products are Manufactured with a Personal
Touch,
Unsurpassed Attention to Detail
and
the Most Stringent Quality Assurance!
TYPICAL RAPTOR™ INSTALLATION LAYOUT
NOTE: The pictures used in this manual are for example only and may not be exactly the
same as your truck.
Figure 1