PureFlow AirDog FRRP-100 - Dodge Cummins 1998.5-2002 - Manual (Page 6)

6
INSTRUCTIONS
REMOVING THE STOCK PUMP
FIG 1. (SOURCE: alldatapro.com)
1. Disconnect the electrical connector. Reference #6 of Fig. 1
2. Remove the banjo fitting on the inlet side of the stock fuel pump. Reference #4 of Fig 1.
Do not discard this banjo fitting. It will be reused.
3. Remove the banjo fitting from inlet of the filter canister.
4. Remove the fuel line support from the mounting bracket. Reference #3 of Fig 1.
5. Remove the 3 mounting nuts at the top of the bracket. Reference #2 of Fig 1.
6. The stock pump along with the outlet hose can now be completely removed from the
vehicle.