PureFlow AirDog RP-150 - Dodge Cummin 2003-2004.5 - Manual (Page 10)

10
PureFlow AirDog
Raptor
™ 100 & 150
2003
– 2004 Dodge Cummins
Section 5 Fuel Lines
Section 5A: Connecting the Raptor™ to the Filter Canister.
5A-1. Remove the Lift Pump and fuel supply line from the original factory fuel filter canister.
Figure 7 Figure 8
5A-2. Install the Fuel Filter Canister Inlet Fitting (001-4A-1-0005ZB) with O-ring into the inlet
port on the fuel filter canister with the original pump mounting screws. Properly torque
the fitting.
Connecting the Raptor™ fuel outlet to the filter canister inlet!
5A-2. Insert the female quick connect end (see figure 9) of the
“Pressure Hose Assembly” into the male quick connect fitting
previously installed in the port marked “OUT”. You will hear a
“click” when it connects.
Figure 9
5A-3. Connect the other end of the “Pressure Hose Assembly” (Figure 10) to
the inlet fitting installed in step 5B-1. It will “click” when properly connected.
Figure 10