Engine’s ecm – PureFlow AirDog DF-165 - Dodge Cummins 1998.5-2004 User Manual
Page 15
15
PureFlow AirDog
AirDog
®
II Dodge 1998 ½ - 2004
Section 6 Electrical Harness
The AirDog
®
II is equipped with a relay controlled wiring harness featuring
water resistant connectors.
When properly installed, the AirDog
®
II is controlled by the
engine’s ECM.
WIRING DIAGRAM
Figure 23
The AirDog
®
II is activated by the ECM through a relay controlled wiring harness connecting
directly to the original ECM Deutsch pump connector.
*
*
Figure 24
CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate the
two (2) #10 Indicator Light connectors
Indicator Light connectors and pressure sensor lead to
prevent accidental contact. *
The light kit is sold separately and is not included in the kit.
Securing the Relay and Fuse Holder to the Vehicle
6-1.
Secure the relay and fuse holder to the vehicle.
Figure 25
Figure 26