PureFlow AirDog DF-165 - Dodge Cummins 1998.5-2004 - Manual (Page 13)

13
PureFlow AirDog
AirDog
®
II Dodge 1998 ½ - 2004
Section 5 C Fuel Lines
Fuel Suction Line for AirDog
®
II
5C-1. Insert the female quick connect end (see figure 19) of the “Suction Hose Assembly” to
the male fitting previously installed in the “Fuel In” port on the AirDogII. A “click” will
be heard when the fitting is properly connected.
Figure 19
5C-2. Refer to the installation instructions within the Fuel Module Upgrade Kit. Install the
fuel module up-grade kit.
5C-3. Attach the female quick connect end of the “Suction Hose Assembly” to the bulk head
male quick connect installed during the fuel module upgrade. (see Fig 20). A “click”
will be heard when the fitting is properly connected.
Figure 20
NOTE: Figure 20 is for visual reference only. The fuel module in your vehicle may appear
different. However suction line installation will be the same.
5C-4 Any excess fuel hose can be addressed by routing the house in a fashion to take up the
extra length, or a section of the hose can be removed. Push lock splices have been
included if you choose to remove the excess hose.