BNC 1703M - Manual (Page 12)

1703M OPERATING MANUAL
4.3 Communication with PC
For communication with a PC it is necessary to use a PC with IrDA port
or IR adapter and application program PM17XX_14XX supplied on the
installation CD.
Minimum system requirements:
P100
32 Mb RAM
Windows 98, 2000, XP (small font in Windows settings)
2 Mb free on the hard disk and adequate space available to
install the database
800X600 monitor resolution
To install the application program, insert the installation CD and run the
SETUP.EXE program.
The help file and the attached text document describe how to run the
application program.
To communicate with a PC, place the instrument 10-12 cm from the
IR adapter window and press “LIGHT” button 2. After reading the
instrument’s operation history, the instrument automatically switches off
(the LCD displays “OFF”).
4.4 Battery Replacement
• Turn the instrument OFF;
• Remove the lid of the battery compartment (see #9 of Figure 2)
using a screwdriver or a coin;
• Remove the exhausted battery and insert the new one into the
compartment (Figure 2) making sure that the positive (“+”) end of
the battery is inserted first;
• Replace the battery compartment lid.
When the battery is replaced, the LCD displays all segments and the
instrument performs a self check.