Jammin Pro StudioMix 10 User Manual

Page 3

Power Supply
The apparatus should be connected to the power supply only of the type as marked
on the apparatus or described in the manual. Failure to do could result in damage
to the product and possibly the user.

Unplug this apparatus during lightning storms or when unused for long periods
of time.

Ventilation

Do not block areas of ventilation opening. Failure to do could result in fire. Always
install accordance with the manufacturer's instructions.

Fuse
To prevent the risk of fire and damaging the unit, please use only of the
recommended fuse type as described in the manual. Before replacing the fuse,
make sure the unit turned off and disconnected from the AC outlet.

Electrical Connection

Improper electrical wiring may invalidate the product warranty.

Cleaning

Object and Liquid Entry

Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.

Servicing
Do not implement any servicing other than those means described in the manual.
Refer all servicing to qualified service personnel only.

Only use accessories/attachments or parts recommended by the manufacturer.

·Warning

Please remember the high sound pressure do not only temporarily damage your
sense of hearing, but can also cause permanent damage. Be careful to select a
suitable volume.

Objects do not fall into and liquids are not spilled into the inside of the apparatus
for safety.

Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet,

refer to electrician for replacement.

USA/Canada

120 V~, 60 Hz, MXUL5 adapter

Dimenstions

Mains voltage

U.K./Australia

240 V~, 50 Hz, MXUK5 adapter

Europe

230 V~, 50 Hz, MXEU5 adapter

Japan

240 V~, 60 Hz, MXJP5 adapter

Power supply

Power consumption

StudioMix 10: 18 W
StudioMix 12: 23 W

STUDIOMIX 10

Dimensions (H x W x D)
weight (net)

47mm / 37.5mm x 240mm x 208mm

Specifications and appearance may differ from those listed or illustrated.

Measuring conditions:
1:1kHz rel.to 0 dBu; 20 Hz - 20 kHz, line input; main output; unity gain.

2:20Hz - 20kHz; measured at main output. Channels1-4 unity gain: EQ flat; al channels on main mix;

channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference = +6 dBu.

As a result of these efforts, modifications may be made from time to existing products without prior notice.

weight (net)

approx. 1.7 kg

STUDIOMIX 12

Dimensions (H x W x D)

47mm / 37.5mm x 240mm x260mm

approx.

1.3