Fast & Fluid GA450 - Manual (Page 15)

Operator manual GA450 V. 2.2
15
Close the door
1. Pull up the handle (A) to unlock the can table.
2. Push the can table (B) inwards until you hear a ‘click’. The can
table is locked.
3. Close the door.
3.2.5 Start the machine
1. Push the T1, T2 or T3 key and select the mix time. See the
table below. The machine automatically clamps the can and
operates for the chosen time. See § 3.2.8.
2. When the machine detects no can, the machine does not start
to mix. In this case, stop the operation manually. See § 3.2.7.
3.2.6 Remove the can
1. Open the door.
2. Pull up the handle (A) to unlock the can table (B).
3. Pull out the can table until you hear a ‘click’. The can table is
locked.
4. Remove the elastic band.
B
A 1
2
Note
The display shows the time in seconds that
remain before you can open the door.
Note
While the machine operates, you can adjust
the mix time with the + and - keys.
B
A
1
2