Fast & Fluid AT750 - Manual (Page 22)

p19
© Fast & Fluid Management, EuroAT
Contributing to the Protection of the Environment
Packaging Material
The packaging protects the m achine against damage during transport. The pac kaging material was chosen
based on its limited impact on the environment and its inherent possibilities for waste-disposal.
The reuse of pac kaging material saves raw materials and produces less waste material. Generally speaking,
your supplier will take the packaging off your hands.
Discarding the Machine
Discarded equipment usually still c onsists of valuable materials. For this reason, do not sim ply throw your
machine out with the oversized refuse, but ask your supplier whether he will take the m achine back.
If he will not, then enquire at your local government offices or ask a trader of raw m aterials what options there
are for recycling the material (e.g. scrap processing, electric al components and plastic (see below for additional
information).
All red-coloured components
are made of ABS. These
components can be recycled. Inside the red square
pictured above (on the front
of the dispenser) are
electrical components that
can be recycled.