L.B. White I-34 Infraconic Ignition - Manual (Page 9)

A B C
HOSE & QUICK COUPLING KIT
COLLAR MALE END
COUPLING
VALVE
SHUT-OFF
TO G
AS SUP
PLY
BUSHING
NIPPLE
DUST CAP
- ASSEMBLE COUPLING KIT
COMPONENTS & TIGHTEN
SECURELY.
- CONNECT TO GAS SUPPLY.
- PULL BACK COUPLING COLLAR.
- FIRMLY PUSH MALE HOSE END
INTO COUPLING
- RELEASE COLLAR. ENSURE
MALE HOSE END IS SECURELY
LOCKED INTO COUPLING.
CONNECT HOSE TO
GAS CONTROL INLET
& TIGHTEN SECURELY
99
BUSHING
RIGID END
OF HOSE
TO GAS
SUPPLY
VALVE, SHUT-OFF
CONNECT HOSE TO CONTROL VALVE
INLET, TIGHTEN SECURELY
STANDARD HOSE
Your heater is supplied with one of the following gas train
assemblies. Refer to the appropriate illustrations.
GAS TRAIN ASSEMBLY
FIG. 3
1/8 NPT FITTING KIT, PART #23406
A B
NUT
STEM
- ASSEMBLE FITTING
FITTING ASSEMBLY
CONTROL VALVE
INLET
- ATTACH FITTING TO CONTROL VALVE INLET
& TIGHTEN SECURELY.
- CONNECT APPROVED GAS HOSE ASSEMBLY
WITH APPROPRIATE CONNECTIONS TO 1/8 NPT
FITTING.
FIG. 4
FIG. 5