Troubleshooting guide – Steele Products SP-GMK049 User Manual
Page 18

TROUBLESHOOTING GUIDE
1) Starting Failure
Trouble
Sparking (no spark)
Spark plug
Causes
1.Spark plug is wet
2.Carbon deposit in the spark plug
3.The plug gap is too big or too small
4.The electrode burned out
5.Insulation damage
Magneto
Causes
1.Wiress damaged or broken
2.The insulation of coil is bad
3.The gap between stator and rotor
is too big
Trouble
The spark plug works normal
Compression is good and fuel is normal
Causes
1.Excessive fuel usage
2.Fuel is bad /dirty or mixed with water
Compressions bad
Causes
Cylinder and piston ring worn
No fuel in Carburetor
Causes
1.No fuel in the tank
2.Fuel cock is not open
3.Valve in fuel tank cap is clogged
16
Clean and dry
Clean
Adjust gap at 0.6_0.7mm
Replace
Replace
Fix
Fix
Tighten or replace
Replace
Adjust gap at 0.4mm
Fix
Reduce the fuel
Replace
Fix
Fix
Fill the tank
Open it
Clean
Replace