ARB 3438110 - Manual (Page 2)

15/07/03 Page 2 of 4 3782649
Assembly sequence for winch installation.
Rest bull bar face down on two stands so that
the winch can be easily installed.
Assemble the control box bracket (Part No.
3751180) onto the control box, fastening with
control box nuts. Insert rubber grommet
supplied in bolt kit into control box cable hole
and run cables through. Fix control box
bracket to bar using M6x20mm bolts, flat
washers and flange nuts from bolt kit (2 of
each item).
Rubber Grommet
Assemble number plate bracket (Part No.
3751595) onto bull bar using M6x16mm bolts,
flange nuts and 6mm flat washers (2 of each
item), fastening through number plate mount
holes.
Number Plate Bracket Mounting Holes.
Number Plate Bracket.
Attach control box
bracket to bar using two
M6 x 20mm bolts