ARB 3426010 - Manual

9-2-99 Page 1 of 3 3782580
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
ARB WINCH BULL BAR TO SUIT
SUZUKI VITARA WITH 5/6,000lb WINCH
No 3426010
WARNING
THIS BULL BAR MUST NOT BE FITTED TO AIRBAG EQUIPPED VEHICLES.
FITMENT TO AIRBAG EQUIPPED VEHICLES MAY INTERFERE WITH THE
PROPER OPERATION OF THE AIRBAGS AND MAY RESULT IN SERIOUS INJURY.
TAKE NOTE OF THE FOLLOWING:
• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE
HARDWARE SUPPLIED.
• IN THE EVENT OF DAMAGE TO ANY BULL BAR COMPONENT, CONTACT YOUR NEAREST
AUTHORISED ARB STOCKIST. REPAIRS OR MODIFICATIONS TO THE IMPACT ABSORPTION SYSTEM
MUST NOT BE ATTEMPED.
• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED
BY ARB.
• DO NOT REMOVE LABELS FROM THIS BULL BAR.
• THIS PRODUCT OR IT’S FIXING MUST NOT BE MODIFIED IN ANY WAY.
BULL BAR FITTING KIT No 6171073
PART No norm DESCRIPTION
6151146 2 50mm U BOLT
6151122 4 5/16” NUT
4581044 8 M8 FLAT WASHER
4581046 8 M8 SPRING WASHER
6151022 4 M8 X 25mm BOLT
3193420 2 ANCHOR PLATE
6151071 4 3/8” X 1” BOLT
4581040 4 3/8” FLAT WASHER
4581048 4 3/8” SPRING WASHER
6151110 2 5/8 X 6” BOLT
4581051 4 5/8” FLAT WASHER
6151140 2 5/8” NYLOC NUT
6151074 2 3/8” X 1 3/4” BOLT
4581040 4 3/8” FLAT WASHER
3751214 1 CONTROL BOX BRACKET
6151017 2 M6 X 16mm BOLT
4581036 2 M6 SPRING WASHER
4581035 2 M6 FLAT WASHER
6151031 2 M6 NUT
180302 4 CABLE TIES
BAT002 2 BLACK CABLES
BAT003 1 RED CABLE
TOOLS REQUIRED
Basic tool kit and drill with 1/2” drill bit.