ARB 3423020 - Manual (Page 5)

30 11 04 Page 5 of 8 3782653
Before
15. Remove the two bolts in the base of the control
box and reposition them into the more centralised
holes
After
16. Place the 4 solenoids over the 2 metal stands
that are facing upwards. Make sure they line up
with the holes in the base.
17. Replace the 2 cap screws, washers and nuts
removed in step 13 above into original holes.
18. Replace the black cover and refit the three
cover screws (DO NOT OVER TIGHTEN)