ARB RD83 - Manual (Page 15)

3 Installing the Air Locker
13
3.2 Installing the Carrier Bearings
c Apply a thin film of high pressure grease to both bearing journals of
the Air Locker to prevent seizing.
c Using a bearing press or arbor press, press one of the bearing
cones (supplied with the Air Locker kit) onto one bearing journal of
the Air Locker (refer to Figure 8.) until the bearing seats firmly
against the bearing journal shoulder.
Figure 8.
c Invert the Air Locker and press the other tapered roller bearing
cone onto the opposite bearing journal of the differential carrier until
the bearing seats firmly against the bearing journal shoulder.
NOTE : Do not add any shims between the bearings and the
bearing seat. Shimming of the Air Locker will be
performed with the supplied shim kits and/or the
original master shims (if any) on the outside of the
carrier bearings.