1 introduction, Assembly type identification, Important – ARB RD103 User Manual

Page 7: C’ clip

Text mode
Original mode

1 Introduction

1.3

Assembly Type Identification

IMPORTANT:

Sections 2 and 6 of this installation guide have been written to
accommodate two different Dana 35 applications:

The ‘C’ clip retained axle shaft (Refer to Fig.1.)

the non-‘C’ clip type axle shaft (Refer to Fig.2.)

To eliminate confusion, you should identify which figure your axle
matches with. The section numbers within the guide that refer ONLY
to the ‘C’ clip type have been suffixed with an ‘

’, and those that refer

ONLY to the non-‘C’ clip type have been suffixed with a ‘

’.

PLEASE IGNORE ALL SECTIONS WHICH

DO NOT APPLY TO YOUR APPLICATION

Figure 1.

Figure 2.

‘C’ CLIP