beautypg.com

3 installing the air locker – ARB RD153 User Manual

Page 22

background image

3 Installing the Air Locker

20





















Figure 13.

IMPORTANT:

In order for the seal housing to float and self center on the

bearing journal, the seal housing tube must not be pulling

against the seal housing. To check this, rotate the drive flange

back and forth while observing the seal housing movement.

The seal housing should rotate slightly against the spring clip,

but it should not appear to pull away from the face of the

adjuster nut.

IMPORTANT:

Check that the tail of the adjuster nut locking tab does not

push on the seal housing. Bend it up away from the seal

housing with a screw driver if necessary.

See also other documents in the category ARB For the car: